How to increase the moisture content of pellet feed

1. Reduce boiler supply pressure and production use pressure. The higher the pressure, the lower the humidity. 2. Increase the conditioning time. Increase the residence time of the material in the conditioner to make the material and steam fully mixed, which is beneficial to the gelatinization of starch, increase digestion and absorption rate of livestock and poultry, and also enable the material to fully absorb the moisture in the steam, thereby increasing the moisture content of the product. 3. Close all traps. Closing the trap will never cause a blockage, but it will help increase the moisture content of the product. 4. Select the appropriate die size. For a die with a larger thickness, the frictional resistance during the granulation process is large, the material does not easily pass through the pore size, and when the extrusion granulation is performed, the frictional temperature is high, the water dispersion is lost, and the moisture content of the granular product is low. Therefore, it is recommended to select the die, the die diameter, thickness should be appropriate. 5. Select the appropriate amount of cooling air. The purpose of the cooling process is to reduce the temperature of the pellet feed so that it does not exceed the room temperature of 3 °C ~ 5 °C; on the other hand can also take away some of the feed water, so that the product moisture content in line with the required standards.

Automatic Nucleic Acid Extractor

Nucleic acid extraction instrument is an instrument that automatically completes the nucleic acid extraction of samples by applying the supporting nucleic acid extraction reagents. Widely used in disease control centers, clinical disease diagnosis, blood transfusion safety, forensic identification, environmental microbial testing, food safety testing, animal husbandry and molecular biology research and other fields.
Using magnetic beads as the carrier, using the principle that magnetic beads adsorb nucleic acid under high salt and low pH value, and separate from nucleic acid under low salt and high pH value, and then move the magnetic beads or transfer the liquid to realize the entire extraction and purification process of nucleic acid. Due to the uniqueness of its principle, it can be designed into a variety of throughputs, which can be extracted from a single tube or 8-96 samples, and its operation is simple and fast. It only takes 30-45 minutes to extract 96 samples, which greatly improves the The experimental efficiency is low and the cost is low, so it can be used in different laboratories, and it is the mainstream instrument on the market.

Features of Magnetic Bead Nucleic Acid Extractor
1. Enables automated, high-throughput operations.
2. Simple and fast operation.
3. Safety and environmental protection.
4. High purity and high yield.
5. No pollution and stable results.
6. Low cost and easy to be widely used.
7. Different types of samples can be processed simultaneously.

Nucleic Acid Extraction System,Automatic Nucleic Acid Extractor,Nucleic Acid Extraction Machine,Nucleic Acid Extraction Instrument

Jilin Sinoscience Technology Co. LTD , https://www.jlgkscience.com