First, how to distinguish the quality of shot blasting machine
1. Whether the appearance is exquisite and the paint is finely sprayed.
2. Whether the processing of the guard plates, blades, impellers, directional sleeves and split pill wheels is meticulous.
3. Whether the shot blasting effect and efficiency can achieve the expected effect.
4. Whether the service life of the damaged parts can meet the requirements of the industry.
Second, the installation of shot blasting machine All shot blasting machines must comply with the following rules during the installation process:
1. The host is in place: the level and weight of the host must meet the drawing requirements when it is in place.
2. Sub-component installation should be carried out from bottom to top.
3, rail or catenary, roller type should be caused by the inside of the device.
4. Partial pre-test should be carried out during the test run, and then all running after normal operation.
Third, shot blasting machine operation instructions The operator must pay attention to the electrical cabinet instrument display during the operation of the equipment is normal.
1. All personnel entering the blasting room must wear eye protection glasses and a safety helmet.
2. The operator must check the equipment every day. These include: lubrication and mechanical parts. Lubrication parts such as: reducer, hydraulic, oil mist and bearing chain. Mechanical parts such as: wear parts of the rotating parts, wearing parts of the wearing parts. Register wear and tear every day and replace consumables in a timely manner. Example: If the blasting machine has vibration, it must stop immediately to replace the blade.
3, the lubrication part should ensure timely refueling.
4. The directional sleeve must be adjusted and replaced in time.
5. Check if the amount of steel shots is sufficient every day.
Fourth, shot blasting machine tips
1. During the cleaning process of the shot blasting machine, the workpiece should be placed in the projectile area as much as possible. This can improve the cleaning efficiency and reduce the wear of the guard plate and increase its service life.
2. In the case that the workpiece cannot be increased, the directional sleeve should be adjusted so that the projectile steel shot is projected to the workpiece at the most amount, which can also increase the life of the shield and reduce its wear.
3. The dust removal system should adjust the gates of the branch pipes to make the wind distribution reasonable and enhance the dust removal effect. 2 The dust collector should be cleaned regularly.
frozen delicious Tangyang sea crab,frozen Tangyang sea crab seafood,seafood frozen Tangyang sea crab
Zhoushan Banddfoods Co., Ltd. , https://www.bandd-food.com