In order to ensure the safety of the agricultural machinery and ensure that the new agricultural machinery can operate normally, the new agricultural machinery must be prepared in time before use. The tractor is taken as an example below.
Tighten the connector
Although the tractor is factory-tested, it is inevitable that the machine will loosen during the repeated operation. To this end, all kinds of connectors and fasteners should be tightened in time, especially the steering system, brake system, suspension and wheels.
Check the liquid level
Mainly fuel tank oil level, tank water surface, transmission and rear axle lubricating oil level, and battery electrolyte level. When it is found that the liquid level is insufficient, the liquid material should be added in time.
Use oil properly
Before use, check the amount of oil in the oil pan, and it should be no less than the oil mark. If the tractor is shipped from the factory in summer, and when it is bought back in winter, it should be replaced with winter oil and vice versa. The switch of the oil filter on the large tractor should be turned to the "summer" or "winter" position by season or temperature. Some manufacturers in order to avoid the oil in the oil bath type oil filter oil pan spilled out during the operation process, but not added at the factory, should pay attention to add oil after buying.
Don't relax
　　 It is to make the speed of the new machine from low to high, and the load from small to large. Through the step-by-step operation process, the machining marks on the friction surfaces such as gears and shafts are polished to become more spliced. Running-in has an important role in extending the service life of parts. Do not neglect the running-in process in order to save fuel and save trouble. Otherwise, the machine will be damaged in advance due to small loss.
Wifi Wireless Baby Monitor,Radio Baby Monitor,Wireless Baby Monitors,Wireless Camera Baby Monitor
Shenzhen Zuomi Technology Co., Ltd. , https://www.bkvis.com