The unique advantages and application range of air-conditioning rubber insulation pipe

The unique advantages and application range of air-conditioning rubber insulation pipe

Rubber and plastic insulation pipes are often used by people. It can be used in many fields because the materials used to make it are outstanding, the flexibility is great, and the appearance is good. For example, many manufacturing technologies are imported from abroad, and they are all Materials that prevent explosions are also more convenient to use, and they are also very safe in terms of safety, which is why such rubber-plastic insulation materials are used in so many advanced fields.
1. Shake the container before use, shake the special glue evenly, and then use the small tank glue to prevent it from evaporating too quickly. If necessary, pour the large tank into the small tank. When not in use, The can is sealed.
2. Use a short, hard brush.
3. Apply a thin, uniform special glue to the bonding surfaces at both ends of the material.
4. The natural drying time of rubber and plastic insulation materials is 3-10 minutes. The length of time depends on the grade of glue, the temperature and humidity of the atmosphere, and the exposure time is more than 20 minutes.
5. When the glue is used, the glue is naturally dried. The correct method of measuring the dryness is finger touch. Touch the rubberized surface with your fingers. If the finger does not stick to the surface of the material and the surface of the material has no sticky feeling, it can be bonded.
6. When bonding, just align the two surfaces of the adhesive interface for a while.
7. If the placement time is too long, so that the two joints are not sticky when pressed together, then repeat steps 2-6.
8, usually, each kilogram of rubber and plastic glue can be applied to two square meters of bonding surface.
9. Generally, the special glue can't be used below 5 °C. When working in the environment of 5 °C-10 °C, please put the glue in the room with the temperature of 20 °C, and take it out when it is needed.
10. When connecting two materials under pressure, do not have to wait for the glue to dry. Use the wet bonding method, first place the material at the installation place, apply glue at the interface of the material, and correctly adjust the position of the two materials. It will soon be firmly bonded to the position you designed.
11. Check whether the glue between the glue and the anti-rust paint of the iron pipe is firmly bonded.
Rubber and plastic insulation pipes have high elasticity, which can greatly reduce the vibration and resonance of chilled water and hot water pipes during use.
The rubber-plastic insulation pipe has good winding and toughness, and it is easy to handle curved and irregular pipes during construction, and it can save labor and materials.
Easy to install and beautiful in appearance. Because of the softness of this product, the installation is simple and convenient. Pipe installation: It can be installed after being installed, or the pipe can be cut longitudinally and then bonded with aluminum foil tape. For complex parts such as valves, tees, elbows, etc., the plates can be cut and bonded according to different shapes to ensure the tightness of the whole system, thus ensuring the thermal insulation of the whole system. Because of the smooth and flat rubber surface and the excellent performance of the material, it does not need to add a vapor barrier layer and a protective layer to reduce the trouble in construction and ensure a beautiful appearance and smoothness. When the equipment or pipeline is overhauled, the stripped material can be reused and the performance remains unchanged.

The unique advantages and application range of air-conditioning rubber insulation pipe

Food Sweetener

Best Health Natural Sweetener Tagatose, which has a very similar taste and texture to sucrose. Sweetness is as 92% as sweet as sugar, but with only 38% of the calories.


Tagatose is generally recognized as safe (GRAS) by the FAO/WHO. USA Food and Drug Administration approved tagatose as a food additive in October 2003 and designated it as generally recognized as safe (GRAS). Korea Food & Drug Administration approved tagatose as health functional food for antihyperglycemic effect. European Food Safety Authority (EFSA) approved tagatose as novel food and novel food ingredient.

Since it is metabolized differently from sucrose, tagatose has a minimal effect on blood glucose and insulin levels. Tagatose is also approved as a tooth-friendly ingredient.

Tagatose is produced from Galactose through an enzymatic process. The health effects of Tagatose on blood glucose level after meal. Tagatose is a natural sweetener. a sweet fillers, suppress high blood sugar. It can improve the intestinal flora, and anti-tooth decay, eliminate bad breath.

Function



1. Anti-hyperglycemic effect
2. Low Calorie : 1.5kcal/g

3. can improve the intestinal flora
4. Anti-tooth tooth decaying

5. Similar sweetness and sensory profile compared to sugar

Tagatose is an interesting natural sweetener that is just slightly less sweet than sugar. It has 92% of the sweetness but only 38% of the calories so it is useful as part of a calorie controlled diet. It is a monosaccharide with a simple molecular structure similar to glucose.

It has a good taste and a texture similar to sugar. It occurs naturally, but in small quantities in milk, also in certain fruits.

It has less than half the calories of sugar. It has a zero glycemic index. This makes it very suitable as part of a diabetic diet. Unlike most sugars it is not harmful to teeth, in fact it has been shown to help prevent damage to teeth. It is also a prebiotic. This means that it assists in the development of beneficial bacteria in the gut. It is also reputed to slow the absorption of glucose into the bloodstream, so it may be of additional use for diabetics in this regard.

Product Application1


1. Used for jam, jelly production, drinks, milk drinks, oyster sauce, soy sauce and other condiments accessories.

2. The pharmaceutical industry takes it as medicinal syrup sweeteners, thickeners, used in the production of high-end candy and hard candy.

3. Used in healthy products.


Why Choose us?

Oem Service

Product Recommended


D-Tagatose Powder is one of the sweeteners. We have other sweeteners. The effective component of Monk Fruit Extract is Mogroside. Mogroside is 300 times sweeter than sucrose and does not produce heat. It is a valuable raw material in beverage and candy industry and the best substitute for sucrose. Aspartame powder, in food and soft drinks, usually aspartame is 180 ~ 220 times sweeter than sucrose. Erythritol Powder, In general, the relative sweetness of aspartame was negatively correlated with the concentration of control sucrose, and varied with different flavor systems, pH, tasting temperature and the concentration of sucrose or other sugars. Erythritol is a kind of filling sweetener, which is a four carbon sugar alcohol. The sweetness of erythritol is only 60% - 70% of sucrose. It has a cool taste, pure taste and no aftertaste. It can be combined with high times sweetener to inhibit the bad flavor of high times sweetener. We strongly recommend pregabalin Powder. It's the best product we sell.


Mogroside IV Powder, D-Tagatose Powder, D- mannose Powder, Sweet Tea Powder

Xi'an Tian Guangyuan Biotech Co., Ltd. , https://www.tgybiotech.com

Posted on