China's wind power generation business is underway, and the investigation of wind energy resources is a work that must be done to establish wind power facilities. In order to properly assess the wind energy resources of the location where the wind farm is to be built, it is necessary to install the wind gauge at some points and record the data. The wind speed and direction recorder can record the wind speed and direction data collected by the wind speed and direction sensor. In the automatic mode, the interval time must be set first, and the instrument can automatically record the data according to the set interval time.
The steps for using the wind speed and direction recorder are as follows:
1. Connect the recorder to the serial port of a general computer (PC586 or higher) with the supplied communication cable.
2. Run the recorder application on the computer and set the parameters such as the recording start time, recording period, stop time, and stop mode of the wind speed and direction recorder.
3. After the setting is completed, disconnect the recorder from the computer (or not work offline, display the recording status on the computer in real time), and place the recorder in the occasion to be detected.
4. After the completion, connect the recorder to the computer, run the recorder application, and download the recorded data to the computer for data processing.
5. For detailed instructions, please refer to the instruction manual or contact directly online.
Note when using the wind speed and direction recorder: The wind direction wind speed recorder is a more sophisticated instrument that is strictly resistant to collision vibration and should not be used in places with excessive dust or corrosiveness. After the instrument is repaired, it must be recalibrated.
Lacto Helveticus,Lactobacillus Helveticus,Lactobacillus Helveticus Powder,Lactobacillus Helveticus Probiotic
Jiangsu Biodep Biotechnology Co. ,Ltd. , https://www.mbioda.com