With the continuous development of health food technology, the conventional smashing methods have become less and less suitable for production needs. As a high-tech processing method, the food pulverizer has been applied to the processing and production of many health foods. Many inedible parts of edible plants, microorganisms, and even animals and plants can be absorbed by the body after ultra-micronization. The refined food has a strong surface adsorption and affinity. Therefore, it has good aroma, dispersibility and solubility, and is easily absorbed by the human body.
Here is a brief introduction to everyone, the operation method of the food shredder:
1. Check: (1) Before use, check whether the feet of the food grinder are all grounded and stable; (2) whether the locking bolts are locked; whether the crusher filter is intact; (3) the belt guard and other connecting parts Whether it is fastened; (4) It is confirmed that all of them can be used after they are normal, otherwise they should be repaired or reported.
2. Start: (1) Close the power supply of the distribution box, the indicator light is on, press the button and the pulverizer starts; (2) Observe the current of the pulverizer and the running sound. If there is any abnormality, stop the maintenance immediately.
3. Feeding: (1) After confirming that the food pulverizer is in normal operation, it can be fed. When feeding, the material is first poured into the hopper, and the material is gently pushed into the pulverizer with a fine wooden stick. The material should not be too large or too thick; (2) the pulverized fine material is loaded into the transfer barrel, after the barrel is full, Immediately cover the inside of the plastic bucket and the outer cover to prevent the material from absorbing moisture; (3) If you hear abnormal sound during the pulverization process, you should immediately stop the maintenance and repair, and then restart the confederation; (4) After the feeding is completed, the rotor should be idling 2-3 In order to make the residue all pulverized and pumped out, press the red button to stop.
4, cleaning: (1) because the material is very easy to absorb moisture, after the smashing, the food pulverizer hopper, the material on the fuselage should be swept out into the bag with a long brush, and the pulverizer feed part is opened, with wet The burlap or water will be cleaned up in the pulverizer; (2) Re-installed after each cleaning; (3) Open the heating radiator to ensure that the drying and pulverizer are dried before the next use.
Shine Skin Pumpkin Seeds Inshell
Shine Skin Pumpkin Seeds Inshell,Seed Pumpkin,Shine Skin Pumpkin Seed,Dehulled Pumpkin Seed
Inner Mongolia Xuanda Food Co., Ltd. , https://www.xuandagroup.com