Jinhua Zhengbang Machinery Manufacturing Co., Ltd. is located in Jinhua City, Zhejiang Province, a beautiful tourist city. For 20 years, the company has been committed to the development and manufacture of LW horizontal screw discharge sedimentation centrifuge. It is a member of China Separation Machinery Industry Association. It has passed the new ISO9001-2008 international quality management system standard certification and has the registered trademark of centrifuge products*. The company's horizontal screw centrifuge won the gold medal of the 2010 Shanghai Science and Technology Expo. The company has strong technical force, complete production technology equipment and quality testing equipment, and has accumulated technical experience in the industry and domestic and international centrifuge manufacturing. It learns from each other's strengths and strives for excellence, and continuously introduces high-efficiency, energy-saving and environmentally friendly LW horizontal screw discharge sedimentation and centrifugation. The machine meets the production requirements of solid-liquid separation in various industries. The leading product horizontal screw discharge sedimentation centrifuge is widely used in petroleum, chemical, mineral processing, papermaking, pharmaceutical, food, environmental protection sewage treatment and other industries, and has been exported to many countries and regions abroad. The horizontal screw discharge sedimentation centrifuges provided by the company have excellent performance, reliable quality and timely and timely after-sales service, and have won the trust and continuous cooperation of users at home and abroad!
A centrifuge is a machine that uses centrifugal force to separate liquid and solid particles or components of a mixture of liquid and liquid. The following describes the maintenance and maintenance methods of the centrifuge based on domestic and foreign practical experience.
Centrifuge maintenance:
1. Turn off the power before the centrifuge is running, and first loosen the brake of the centrifuge, and try to turn the drum to see if there is any bite.
2. Check for loose or abnormal conditions in other parts of the centrifuge.
3. Turn on the power and start the drive in a clockwise direction (usually about 40-60 seconds from the stationary state to the normal operation).
4. Usually, after each equipment arrives at the factory, it must be empty for about 3 hours, and it can work without abnormal conditions.
5, the material should be placed as evenly as possible.
6, must be operated by a person, the capacity must not exceed the rated amount.
7. It is strictly forbidden to overspeed the machine so as not to affect the service life of the machine.
8. After the machine is started, if there is any abnormal situation, it must be stopped to check and repair and repair if necessary.
9. When the centrifuge is working at high speed, it is not allowed to touch the drum with the body to prevent accidents.
Centrifuge maintenance:
In order to ensure the normal operation of the centrifuge, please rotate the parts every 6 months. At the same time, check the running lubrication condition of the bearing, whether there is wear phenomenon; whether the components in the brake device are worn or not, and replace it severely; the bearing cover has no oil leakage.
After the machine is used, it should be cleaned and kept clean.
Do not separate the non-preservative centrifuge from the highly corrosive materials; in addition, strictly follow the equipment requirements and regulations, and the non-explosion-proof centrifuge should not be used in flammable or explosive places.
The mesh number of the filter cloth should be determined according to the size of the solid phase particles of the separated material, otherwise the separation effect will be affected. In addition, when installing the filter cloth, insert the filter cloth sealing ring into the drum sealing groove to prevent the material from running in.
A centrifuge is a machine that uses centrifugal force to separate liquid and solid particles or components of a mixture of liquid and liquid. The following describes the maintenance and maintenance methods of the centrifuge based on domestic and foreign practical experience.
Centrifuge maintenance:
1. Turn off the power before the centrifuge is running, and first loosen the brake of the centrifuge, and try to turn the drum to see if there is any bite.
2. Check for loose or abnormal conditions in other parts of the centrifuge.
3. Turn on the power and start the drive in a clockwise direction (usually about 40-60 seconds from the stationary state to the normal operation).
4. Usually, after each equipment arrives at the factory, it must be empty for about 3 hours, and it can work without abnormal conditions.
5, the material should be placed as evenly as possible.
6, must be operated by a person, the capacity must not exceed the rated amount.
7. It is strictly forbidden to overspeed the machine so as not to affect the service life of the machine.
8. After the machine is started, if there is any abnormal situation, it must be stopped to check and repair and repair if necessary.
9. When the centrifuge is working at high speed, it is not allowed to touch the drum with the body to prevent accidents.
Centrifuge maintenance:
In order to ensure the normal operation of the centrifuge, please rotate the parts every 6 months. At the same time, check the running lubrication condition of the bearing, whether there is wear phenomenon; whether the components in the brake device are worn or not, and replace it severely; the bearing cover has no oil leakage.
After the machine is used, it should be cleaned and kept clean.
Do not separate the non-preservative centrifuge from the highly corrosive materials; in addition, strictly follow the equipment requirements and regulations, and the non-explosion-proof centrifuge should not be used in flammable or explosive places.
The mesh number of the filter cloth should be determined according to the size of the solid phase particles of the separated material, otherwise the separation effect will be affected. In addition, when installing the filter cloth, insert the filter cloth sealing ring into the drum sealing groove to prevent the material from running in.
Bee pollen comes from
nature, is the bee from the flowers (nectar plants and pollen plants)
flowers collected in the pollen grains, and joined the special glandular
secretions (nectar and saliva) mixed into an irregular Flat round shape. Bee
pollen has a unique natural health care and medical and cosmetic value,
is more and more people know, is a high-protein low-fat nutritional
health food, known as "all-round nutrition food" "concentrated natural
medicine library" "Oral cosmetics" and so on, is the treasure of human natural food.
We provide rape pollen, tea pollen, sunflower pollen and mixed pollen, they are all collected from our professional green beefarm base.
We have applied the certificate of ISO, HACCP and GMP, making sure the quality of bee products.Bee Pollen,Bulk Bee Pollen,Natural Bee Pollen,Mixed Bee Pollen
Easy Food (Jiaxing) Co., Ltd. , https://www.jxeasyfood.com