The general inkjet printer's consumables refer to the three solvents: ink, thinner and cleaning agent. The inkjet printer uses two kinds of solvents, ink and thinner, to automatically detect the viscosity of the ink through the printer. Automatically adjust the mixing of thinner and ink. When the viscosity of the ink is too high or too low, the charging of the ink droplets will not reach the optimal state of charge. Since the angle of deflection will also be affected to some extent, the problem directly reflected is the typing flower. The word points are excessively divergent, so try not to artificially control the viscosity of the ink. The printer is strictly tested and debugged at the factory. Under normal circumstances, the viscosity of the ink is used for a long time. The viscosity is set.
In order to ensure the stable operation of the machine, it is important not to use alternative inks or thinners. Because the ink in the ink path is mixed with other alternative consumables, it is likely to cause various problems in the machine, for example: nozzle Blockage, ink path is damaged, and gear pump wear is accelerated. These problems will cause irreversible damage to the printer. Since the printer's ink path design includes debugging and selecting ink, it will use the most suitable ink and thinner to run the test in the factory. Once there are other alternative consumables, the composition is different. Mixed with other impurities, it is easy to cause problems with the printer.
The cleaning agent is used to clean the nozzle and the recovery tank. If there is more dust in the environment, use the printer to cover the nozzle cover, so as to avoid impurities or other foreign matter falling into the recovery tank, resulting in recycling. The tank does not recycle and a series of other problems, so remember to use the cleaning agent to clean the nozzle when not in use, to avoid some minor problems.
Flexible Cover,Breathing Cap,Tyvek cover
AUSTAR Goup , https://www.hansencleanroom.com