In the modern industrial production, the use of the testing machine is very common. Its existence can provide the help of industrial production, and it can also create very considerable benefits for the use of enterprises. Then the electronic tension machine has problems in the process of use. What should I do? How to operate correctly? Tianhui to introduce to you.
The solution to the problem when using the electronic tension machine :
During the normal use of the equipment, if there is a problem with the operation method or if you do not pay attention to the maintenance, there will be different degrees of problems. For example, if the equipment beam is not lowered, the user needs to check whether the limit switch on the equipment beam is not If it is damaged, replace the limit switch; if the beam moves in the opposite direction, it means that there is a problem with the test machine software. At this time, everyone should be in time.
If the beam of the equipment lifting button does not respond during use, you need to press the emergency stop button immediately and pull the emergency stop button; do the thermal relay protection, open the electric control cabinet, reset the thermal relay, if the beam is up and down If it is damaged, it should be replaced in time.
The correct use of the electronic tension machine :
When operating the equipment, it must be used in conjunction with the control cabinet measurement and control system, and pay attention to routine maintenance. Every part of the test machine should be wiped clean frequently. After wiping off the surface without painting, use a veil and apply some oil to wipe it again. It can prevent rust, especially during the rainy season, and pay more attention to wiping. When not in use, use a dust cover to prevent dust from entering.
All movable doors on the control cabinet can not be opened when placed, otherwise it will enter the inside of the equipment, which will affect the degree of the equipment mechanism; after long-term frequent use, the oil quantity of the equipment will be reduced or deteriorated. Check the situation every one to three months. After the equipment is used completely, after completely stopping the operation for a period of time, observe the oil window on the left side of the control cabinet. If the right side is lower than the oil window, add it in time. If the oil has been deteriorated, if it is found that the oil has deteriorated. Also, change the new hydraulic oil in time.
This is the relevant introduction for the use of electronic tension machine . The above content is mainly to tell everyone that when using this equipment, we must pay attention to the operation method, but also pay attention to daily maintenance, only the maintenance and operation methods are in place to ensure the use of the equipment. At the same time of life, the overall efficiency of the equipment is ensured, thereby creating a greater interest space for the user.
1. Single Use
2. Can be used in food industry, laboratory, manufacturing, cleanroom ect.
3. The weight and size of disposable clip cap can be customized.
4. Single elastic or double elastic for hair nets is per your demand.
Bouffant Cap,Hair Cover,Clip Mob Cap,Strip cap,Clip Caps
Jiangsu Asbao Medical Technology Co., Ltd. , https://www.iigloves.com