First of all, let's look at the difference between the microbial incubator and the light incubator. The light incubator is mainly used for plant cultivation. The microbial incubator has different types according to the type of microorganisms cultivated, and is roughly aerobic and Anaerobic two.
Look at the difference between the constant temperature incubator and the mold incubator. The constant temperature incubator is divided into two types: a water-type electrothermal constant temperature incubator and an electrothermal constant temperature incubator. A water-blocking electrothermal constant temperature incubator: the water jacket can still be well thermostated when it is powered off. It adopts two kinds of temperature control methods: microcomputer intelligent temperature controller and bimetal regulator. Temperature control range: room temperature 5 ° C -60 ° C, can only stabilize the temperature above room temperature, without refrigeration.
The mold incubator, because the suitable growth temperature of mold is 22 ~ 28 ° C, so the mold incubator should have dual-system hot and cold temperature control, when the summer room temperature is higher than 30 ° C, in order to ensure the mold is suitable for growth, it is necessary to cool, the temperature Down-regulation, when the room temperature is lower than 10 °C in winter, in order to ensure the mold is suitable for growth, it is necessary to heat up and raise the temperature. Therefore, the mold incubator and the constant temperature incubator are almost more expensive. The mold incubator is more expensive. There are biochemical incubators and mold incubators around 1000-2000 yuan. Biochemical incubators are widely used in bacteria, molds, microorganisms, Culture and preservation of tissue cells, water quality analysis and BOD test, suitable for breeding experiments and plant cultivation. It is an important test equipment for scientific research institutions, universities, production units or department laboratories in the fields of biology, genetic engineering, medicine, health and epidemic prevention, environmental protection, agriculture, forestry and animal husbandry, but both have dual-system cold and heat temperature control, the main difference The biochemical incubator does not have the function of controlling humidity and without anti-virus, and the mold has both anti-wet and anti-virus functions, so the same volume of mold incubator is slightly more expensive than the biochemical incubator.
Look at the difference between the constant temperature incubator and the mold incubator. The constant temperature incubator is divided into two types: a water-type electrothermal constant temperature incubator and an electrothermal constant temperature incubator. A water-blocking electrothermal constant temperature incubator: the water jacket can still be well thermostated when it is powered off. It adopts two kinds of temperature control methods: microcomputer intelligent temperature controller and bimetal regulator. Temperature control range: room temperature 5 ° C -60 ° C, can only stabilize the temperature above room temperature, without refrigeration.
The mold incubator, because the suitable growth temperature of mold is 22 ~ 28 ° C, so the mold incubator should have dual-system hot and cold temperature control, when the summer room temperature is higher than 30 ° C, in order to ensure the mold is suitable for growth, it is necessary to cool, the temperature Down-regulation, when the room temperature is lower than 10 °C in winter, in order to ensure the mold is suitable for growth, it is necessary to heat up and raise the temperature. Therefore, the mold incubator and the constant temperature incubator are almost more expensive. The mold incubator is more expensive. There are biochemical incubators and mold incubators around 1000-2000 yuan. Biochemical incubators are widely used in bacteria, molds, microorganisms, Culture and preservation of tissue cells, water quality analysis and BOD test, suitable for breeding experiments and plant cultivation. It is an important test equipment for scientific research institutions, universities, production units or department laboratories in the fields of biology, genetic engineering, medicine, health and epidemic prevention, environmental protection, agriculture, forestry and animal husbandry, but both have dual-system cold and heat temperature control, the main difference The biochemical incubator does not have the function of controlling humidity and without anti-virus, and the mold has both anti-wet and anti-virus functions, so the same volume of mold incubator is slightly more expensive than the biochemical incubator.
Guangdong Jia Mei Biological Technology Co.Ltd , https://www.jaymeimask.com